Peugeot 308 Key Fob Replacement
Peugeot's 308 may be somewhat old-fashioned but it's still striking. It's not the most luxurious vehicle in its class, but it's an enjoyable and relaxing driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips can help whether the problem is constant or intermittent.
Water Damage
When you accidentally leave your key fob in a pool or splash it with water when kayaking, swimming, canoeing, rafting or canyoning, it's more likely to be damaged by water. Keep your key fob in a dry bag whenever you are outdoors or engage in things that expose it to excessive water.
It's also essential to make sure that the fob has dried before you open it and use it again. If you notice any odors coming from the fob, such as an industrial-type liquid smell or that of windshield washer fluid, it's another sign that it's been submerged in water.
A wet circuit board can cause the battery to lose its charge, or even explode. If you can remove your keyfob 308 from the water it is best to turn the button side up and shake as much water as you can before opening the casing. When you've opened it, remove the battery and wipe down the circuit board using the help of a cotton swab that has been dipped in 90 percent isopropyl alcohol.
Other reasons your Peugeot 308 remote entry keyless system might not function include a dead coin cell battery or receiver module issues, signal interference or a defective chip. If none of the above are the cause you can reset the system by disconnecting 12 volt battery from your car for 15 mins.
Dead Coin Battery
Peugeot cars come with remote start which allows drivers to start their car from an extended distance, which allows them to warm up or cool down the vehicle prior to entering. This feature is extremely helpful particularly during the cold winter months. The remote start system may cease to function for a variety reasons, including an inactive coin-battery.
A coin-shaped battery that is located inside the key fob can last for a period of two to four years, depending on how often it is used and where it's purchased. The use-by date will be displayed on the packaging or mentioned in the user manual.
If the key fob has stopped working after being exposed to pure tapwater, you need to remove the battery and clean the electronic chip using the help of a paper towel that has been soaked with isopropyl ethanol. Then, dry the chip thoroughly before replacing. If exposed to salty or soapy water, the chip might be fried and you will need to replace the key fob in total.
If you're not certain that the battery is not working properly You can test its voltage with an instrument set to the vehicle's voltage range and connected to the plus and minus terminals. If visit the following internet page is less than 12-13 volts, then you need to replace the battery. You can also reset the computer in the onboard computer by disconnection and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should then start after this.
Faulty Receiver Module
If you don't see the "Key Detected" you might find the receiver module malfunctioning. It's the part that sends an indication to the car when your key fob is activated, which acts as an immobiliser, and stops it from starting until the correct key is used.
It could be due to many reasons, such as water damage or simply aging. If your Peugeot 308 key fob has been exposed to dirty tap water, for example the chip that is located inside is damaged. In this situation it is necessary to take it apart and clean it thoroughly using isopropyl alcohol, or electronic cleaner. Once the battery has dried you can try it again.
If the issue continues to persist, it is recommended to see the local Peugeot expert or locksmith. They can use the diagnostic tool to pinpoint the problem and fix it.
It can be stressful to lose your Peugeot car key. However, a professional auto locksmith can solve the issue in just a few minutes. They can cut a brand new key and programme it to your vehicle, making sure you can get back off the road as quickly as possible. Click here to find a locksmith near you.
Faulty Electronic Chip
The electronic chip in your Peugeot 308 key fob is a very crucial component of the remote control system. If the chip is damaged, you may have problems starting your car or receive a message saying "anti-theft". If this occurs, the only option to fix the issue is to obtain a new key. Luckily, auto locksmiths who are professionals can provide the service in the shortest time.
The chip inside the key fob of your Peugeot 308 may fail due to different reasons, such as sweat, water damage or dirt. If your Peugeot key fob has been exposed to soapy or dirty water, it needs to be cleaned as soon as possible. You can employ a paper towel as well as isopropyl alcohol to wipe the electronic component. The battery should be allowed to dry completely.
Radio interference can cause a key fob's functionality to cease. This could be due to other devices operate on the same frequency as your Peugeot keyfob. It can also be caused by weather conditions or objects in the vicinity. If you experience this problem, it is best to visit the Peugeot dealership.
The Peugeot 207/308 Key Fob is delicate and needs special attention. It is essential not to drop or throw the key fob. If you lose something, try to locate it as quickly as you can. You can reset all on-board computers by disconnecting the battery that is 12 volts for a few minutes. Make sure you disconnect the negative cable first, and then the positive.